EFFECT OF THE BRAZILIAN THERMAL MODIFICATION PROCESS ON THE CHEMICAL COMPOSITION OF Eucalyptus grandis JUVENILE WOOD – PART 2: SOLUBILITY AND ASH CONTENTS

dc.creatorDjeison Cesar Batista
dc.creatorGraciela Ines Bolzón de Muñiz
dc.creatorJosé Tarcísio da Silva Oliveir
dc.creatorJuarez Benigno Paes
dc.creatorSilvana Nisgoski
dc.date2016
dc.date.accessioned2026-07-07T04:36:33Z
dc.descriptionThis article reports continuation of a study of the influence of the Brazilian process of thermal modification called VAP HolzSysteme® on the chemical composition of eucalyptus wood. Flatsawn boards of Eucalyptus grandis juvenile wood were tested for four treatment levels: untreated, and thermally modified at final cycle temperatures of 140 °C, 160 °C or 180 °C. Chemical analyses were carried out according to the standards of the Technical Association of the Pulp and Paper Industry and encompassed 1% NaOH solubility and ash content. The 1% NaOH solubility increased in the wood thermally modified at 140 °C and 160 °C in relation to the untreated wood, but did not increase further 180 °C, indicating that the treatment at 180 °C was not enough to cause more degradation of hemicelluloses. In practice, the thermal modification process had no effect on the ash content of wood. The statistical difference observed between the treatment levels untreated and 160°C (0,04 percentage points) can be attributed to the heterogeneity of wood as a material.
dc.formatapplication/pdf
dc.identifier0717-3644
dc.identifierhttps://www.redalyc.org/articulo.oa?id=48545017006
dc.identifier.urihttp://hdl.handle.net/123456789/466683
dc.languageen
dc.publisherUniversidad del Bío Bío
dc.relationhttp://www.redalyc.org/revista.oa?id=485
dc.rightsMaderas. Ciencia y Tecnología
dc.sourceMaderas. Ciencia y Tecnología (Chile) Num.2 Vol.18
dc.subjectAgrociencias
dc.titleEFFECT OF THE BRAZILIAN THERMAL MODIFICATION PROCESS ON THE CHEMICAL COMPOSITION OF Eucalyptus grandis JUVENILE WOOD – PART 2: SOLUBILITY AND ASH CONTENTS
dc.typeartículo científico

Archivos